Jump to content

Translations:KAVAN AP06A - Instruction Manual/74/en

From KAVAN RC Wiki
Revision as of 11:24, 15 October 2025 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:Kavan AP06A - Instruction Manual/74/en to Translations:KAVAN AP06A - Instruction Manual/74/en without leaving a redirect: Part of translatable page "Kavan AP06A - Instruction Manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

5) Once the engine starts, open the throttle barrel to about 1/2 throttle and immediately turn the high speed needle valve in (lean) until the engine runs without cutting out. The exhaust should be very noticeable from the muffler and the engine should sound like it is running very rough. This is a good “rich” mixture setting.