Translations:KAVAN V20 + ETHOS™ - User manual/193/en

From KAVAN RC Wiki
Revision as of 10:30, 19 March 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Curves

Custom curves can be used in input formatting, in the mixers or in the outputs. There are 50 curves available, and can be of several types (between 2 and 21 point, with either fixed or user-definable x-coordinates). In the Mixer a typical application is using an Expo curve to soften the response around midstick. A curve may also be used to smooth a flap to elevator compensation mix so that the aircraft does not 'balloon up' when flaps are applied. In the Outputs a balancing curve may be used to ensure accurate tracking of the left and right flaps.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V20_%2B_ETHOS™_-_User_manual/193/en&oldid=4196"