Jump to content

Translations:KAVAN FS400AR - Instruction manual/14/en

From KAVAN RC Wiki
Revision as of 12:54, 21 October 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Choke Valve

  • The choke valve operating lever can be located either on the left or right side by reversing the hexagon nut and cap screw.
  • Unscrew the cap screw while holding the hexagon nut with the included wrench supplied, and refit the lever to your required location.
  • If the supplied rod is too long, cut it to required length. An unnecessarily long rod may tend to vibrate. The rod should be as short as possible or should have its outer end supported.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_FS400AR_-_Instruction_manual/14/en&oldid=44673"