KAVAN Smart PRO KSW18 Kill switch - Instruction manual
Introduction
Congratulations on purchasing the KAVAN Smart PRO KSW18 Kill switch, a high-performance digital switch featuring an optically isolated switching circuit. Thanks to its excellent noise immunity and signal separation, it is ideal for use as an independent ignition switch. It can be controlled via an RC channel, mechanical switch, or both. The device offers a range of configurable options for flexibility in various setups.
Features
- Optically isolated switching circuit with independent power supply
- Supports a variety of loads: motors, relays, lights, heaters
- Compatible with additional magnetic, mechanical, or electronic switches or buttons (optional touch
switch support)
- Dual switch inputs for enhanced safety
- Supports Duplex EX and FrSky telemetry for configuration
- Configurable via transmitter or MAV Manager PC software
- Firmware update capability
Technical specifications
| Specification | KSW18 |
|---|---|
| Dimensions | 50 x 19 x 10 mm |
| Weight (inc.cables) | 19 g |
| Weight (inc.cables and Magnetic/Touch switch) | 24 g |
| Cables | 3×1 mm² (17AWG) |
| Connectors | - |
| Continuous current | 18 A |
| Peak current (2s) | 30 A |
| Operating current | < 10 mA |
| Operating temperature | (-20)–85 °C |
| Supply Voltage (Rx input) | 4–16 V |
| Supply Voltage (Isolated switching circuit) | 5-26 |
| Telemetry | FrSky (configuration only), Duplex |
| Touch switch support | Yes |
| BEC | No |
| Selectable touch/mechanical switch/button | Yes |
| Status LED | Yes |
Installation
Connect the device as shown in the provided diagram. The switching point and polarity of the RC input signal can be configured in the settings.
Red wire = positive (+)
Black wire = negative (–)
A magnet is included with the switch.
Manufacturer
KAVAN Smart PRO MPSW15 Magnetic switch is made in Czechia by MAV Sense s.r.o.
E-mail: info@mavsense.com | Web: www.mavsense.com
Recycling and waste disposal note (European Union)
Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.
EU declaration of conformity (European Union)
Hereby, KAVAN Europe s.r.o. declares that the KAVAN Smart PRO MPSW15 Magnetic switch is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at www.kavanrc.com/doc.
Guarantee
The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.