Translations:KAVAN Smart PRO KSW18 Kill switch - Instruction manual/10/en

From KAVAN RC Wiki
Revision as of 08:07, 1 December 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
Touch switch installation

obrazek tu - na leve pulce, napravo text pod tim

  • Place the touch button anywhere on your model on the surface made of nonconductive material.
  • Make the status LED visible from outside the fuselage.

Activation steps

  • Connect the receiver battery to the KSW18 and briefly touch the button. The status LED should start blinking. If not, please increase the couch sensitivity parameter in the configuration.
  • Touch and hold the button for about 2 seconds. The LED starts blinking. At this moment, release the button. The main output will be activated.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Smart_PRO_KSW18_Kill_switch_-_Instruction_manual/10/en&oldid=46195"