Jump to content

Translations:KAVAN AP09A - Instruction Manual/43/en

From KAVAN RC Wiki
Revision as of 14:44, 28 January 2026 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:KAVAN AP09 - Instruction Manual/43/en to Translations:KAVAN AP09A - Instruction Manual/43/en without leaving a redirect: Part of translatable page "KAVAN AP09 - Instruction Manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

7. Carburettor Installation

The carburettor is held in position by a cinch bolt and nut. Slide the carburettor into the engine case. Lightly press against the carburettor to slightly compress the O-ring around the base of the carburettor. Tighten the nut on the cinch bolt to hold the carburettor in place. Do NOT over tighten the nut, as this will crush the carburettor base.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP09A_-_Instruction_Manual/43/en&oldid=47842"