Editing KAVAN C1 Plus - Instruction manual

=== Introduction ===
Congratulations on your choice of '''KAVAN C1+ NiMH charger'''. This unit is simple to use, yet the proper operation of this charger and the proper usage of your batteries require some knowledge on the user's part. It is therefore important to read the entire instruction manual before you attempt to use your new charger for the first time.

=== Warning and safety notes ===
* This appliance is not intended for use by young children under 14 years or uninformed persons unless they were adequately supervised by a responsible adult person to ensure that they can use the appliance safely.
* Do not leave the charger unattended while charging. If any malfunction occurs, TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
* Disconnect the battery if it becomes hot immediately. Allow the battery to cool down before reconnecting.
* Do NOT attempt to charge incompatible types of rechargeable batteries or even dry (alkaline, zinc-carbon) batteries. This charger is designed for only charging Nickel-Metal Hydride batteries.
* Never attempt to charge the following types of batteries:
** A battery pack which consists of different types of cells (including different manufacturers)
** Non-rechargeable batteries (Explosion hazard).
** Batteries that require a different charge technique from NiMH.
** A faulty or damaged battery.
** A battery fitted with an integral charge circuit or a protection circuit.
** Batteries installed in a device or which are electrically linked to other components.
** Batteries that are not expressly stated by the manufacturer to be suitable for the currents the charger delivers during the charge process.
* Keep the charger well away from dust, dampness, rain, heat, direct sunshine and vibration. Never drop it.
* Do not allow foreign objects into the charger.
* The allowable AC input voltage is 220–240 V/50 Hz; the charger is supplied with the EU-style plug.
* The battery should be put on a firm level, heat-resistant, non-flammable and nonconductive surface. Never place it on a carpet or similar.
* Keep all the inflammable volatile materials away from the operating area.
* Make sure you know the specifications of the battery to be charged to ensure it meets the requirements of this charger. Otherwise, the battery and charger may be damaged. It can cause fire or explosion due to overcharging.
* Do not attempt to charge batteries at excessive fast charge currents. Check with your battery manufacturer for the maximum charge rate applicable to your battery.
* Do not disassemble the charger.
* Do not leave the charger connected to the mains socket when not charging.