Translations:KAVAN R6 - User manual/41/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 2: | Line 2: | ||
# .In the factory settings, this function is disabled (OFF). | # .In the factory settings, this function is disabled (OFF). | ||
# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver. | # To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver. | ||
# Select '''[ON]''' in the high-speed PWM setting | # Select '''[ON]''' in the high-speed PWM setting. | ||
{{Note|type=error|'''Caution:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.}} | |||
Latest revision as of 10:59, 7 May 2024
How to switch the high-speed PWM mode
- .In the factory settings, this function is disabled (OFF).
- To open the receiver's setup menu, select [Setup] in the RF system menu for the receiver.
- Select [ON] in the high-speed PWM setting.
Caution: The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.