Translations:KAVAN V20 - Quickstart guide/25/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
# Begin the registration process by selecting [Register].
# Begin the registration process by selecting [Register].
# A window will appear with the message „ Waiting....“ with a repeating voice prompt „Register“. Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
# A window will appear with the message "Waiting...." with a repeating voice prompt "Register". Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
# The RID and UID can be set at this stage:
# The RID and UID can be set at this stage:
# Press the [Register] button to complete the setup. The „Registration OK“ dialogue box will appear. Press the [OK] button to continue.
# Press the [Register] button to complete the setup. The "Registration OK" dialogue box will appear. Press the [OK] button to continue.
# Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.
# Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.

Latest revision as of 13:03, 15 May 2024

Message definition (KAVAN V20 - Quickstart guide)
# Begin the registration process by selecting [Register].
# A window will appear with the message "Waiting...." with a repeating voice prompt "Register". Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
# The RID and UID can be set at this stage:
# Press the [Register] button to complete the setup. The "Registration OK" dialogue box will appear. Press the [OK] button to continue.
# Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.
  1. Begin the registration process by selecting [Register].
  2. A window will appear with the message "Waiting...." with a repeating voice prompt "Register". Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
  3. The RID and UID can be set at this stage:
  4. Press the [Register] button to complete the setup. The "Registration OK" dialogue box will appear. Press the [OK] button to continue.
  5. Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_V20_-_Quickstart_guide/25/en&oldid=13044"