Translations:KAVAN V20 - Quickstart guide/8/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
==== | ==== Changing the mode ==== | ||
From the gimbal menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, they can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centering arm mechanism, then screw it into the other gimbal. | From the gimbal menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, they can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centering arm mechanism, then screw it into the other gimbal. | ||
Latest revision as of 12:38, 18 March 2024
Changing the mode
From the gimbal menu, change the current mode (mode 2 by default) to the desired mode. Turn off the transmitter, remove the battery case cover and disconnect and remove the battery. Unscrew the 4 screws of the transmitter back cover and remove it (pay extra attention to the attached antennas, they can be disconnected for better handling). To change to the desired mode, loosen the screw holding the self-centering arm mechanism, then screw it into the other gimbal.