Translations:KAVAN V20 - Quickstart guide/4/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 1: | Line 1: | ||
* Up to 20 flight modes for perfect control of your model in all conditions | |||
* Full telemetry with data transfer from a wide range of sensors with the ability to write on an MicroSD card | |||
* Memory for 64 models expandable via MicroSD card | |||
* Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector | |||
* Up to 2 external antennas can be connected | |||
* 6 three-position switches, 2 two-position (1 momentary) switches | |||
* 2 rotary side dials, 2 momentary buttons on the rear | |||
* 6 user-programmable buttons (front) | |||
* 2 programmable mixer rotary knobs | |||
* 4 digital trims | |||
* Programmable slider (tension potentiometer) | |||
* 6-axis gyro sensor | |||
* Precision gimbals housed in 10 ball bearings | |||
* Trainer mode via cable or wirelessly via Bluetooth® | |||
Latest revision as of 12:38, 18 March 2024
- Up to 20 flight modes for perfect control of your model in all conditions
- Full telemetry with data transfer from a wide range of sensors with the ability to write on an MicroSD card
- Memory for 64 models expandable via MicroSD card
- Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
- Up to 2 external antennas can be connected
- 6 three-position switches, 2 two-position (1 momentary) switches
- 2 rotary side dials, 2 momentary buttons on the rear
- 6 user-programmable buttons (front)
- 2 programmable mixer rotary knobs
- 4 digital trims
- Programmable slider (tension potentiometer)
- 6-axis gyro sensor
- Precision gimbals housed in 10 ball bearings
- Trainer mode via cable or wirelessly via Bluetooth®