Translations:KAVAN V20 + ETHOS™ - User manual/280/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
===== ''' | ===== Low position trim ===== | ||
For glow and gas engines the '''Low position trim''' is used to adjust the idle speed. The idle speed can vary depending on the weather, etc., so having a way to adjust the idle speed without impacting the full throttle position is important. If 'Low position trim' is enabled, the throttle channel goes to an idle position of -75% when the throttle stick is at the low position (please refer to the channel bar display at the bottom of the screenshot above). The throttle trim lever can then be used to adjust the idle speed between -100% and -50%. Throttle Cut can then be configured to cut the engine with a switch. |
Latest revision as of 11:30, 19 March 2024
Low position trim
For glow and gas engines the Low position trim is used to adjust the idle speed. The idle speed can vary depending on the weather, etc., so having a way to adjust the idle speed without impacting the full throttle position is important. If 'Low position trim' is enabled, the throttle channel goes to an idle position of -75% when the throttle stick is at the low position (please refer to the channel bar display at the bottom of the screenshot above). The throttle trim lever can then be used to adjust the idle speed between -100% and -50%. Throttle Cut can then be configured to cut the engine with a switch.