Translations:KAVAN ESCs - Instruction manual/23/en: Difference between revisions

Latest revision as of 08:22, 28 January 2025

Message definition (KAVAN ESCs - Instruction manual)

=== Troubleshooting ===
{| class="wikitable" style="width: 100%; text-align: center;"
!'''Trouble'''
!'''Possible reason'''
!'''Solution'''
|-
|After powering on, the motor does not work and no sound is emitted.
|The connection between the battery pack and ESC is not correct.
|Check the power connection. Replace the connector.
|-
|After powering on, the motor does not work, such an alert tone is emitted: "beep–beep–, beep–beep–, beep–beep–" (Every "beep–beep–" has a time interval of about 1 second).
|Input voltage is abnormal, too high or too low.
|Check the voltage of the battery pack.
|-
|After powering on, the motor does not work, such an alert tone is emitted: "beep–, beep–, beep–" (Every "beep–" has a time interval of about 2 seconds).
|Throttle signal is irregular.
|Check the receiver and transmitter. Check the cable of the throttle channel.
|-
|After powering on, the motor does not work, such an alert tone is emitted: "beep–, beep–, beep–" (Every "beep–" has a time interval of about 0.25 seconds).
|The throttle stick is not in the bottom (lowest) position.
|Move the throttle stick to the bottom position.
|-
|After powering on, the motor does not work, a special tone "56712" is emitted after a 2-beep tone (beep–beep–).
| The direction of the throttle channel is reversed, so the ESC has entered the program mode.
|Set the direction of the throttle channel correctly.
|-
|The motor runs in the opposite direction.
|The direction. The connection between ESC and the motor needs to be changed.
|Swap any two wire connections between ESC and motor.
|}

Troubleshooting

Trouble	Possible reason	Solution
After powering on, the motor does not work and no sound is emitted.	The connection between the battery pack and ESC is not correct.	Check the power connection. Replace the connector.
After powering on, the motor does not work, such an alert tone is emitted: "beep–beep–, beep–beep–, beep–beep–" (Every "beep–beep–" has a time interval of about 1 second).	Input voltage is abnormal, too high or too low.	Check the voltage of the battery pack.
After powering on, the motor does not work, such an alert tone is emitted: "beep–, beep–, beep–" (Every "beep–" has a time interval of about 2 seconds).	Throttle signal is irregular.	Check the receiver and transmitter. Check the cable of the throttle channel.
After powering on, the motor does not work, such an alert tone is emitted: "beep–, beep–, beep–" (Every "beep–" has a time interval of about 0.25 seconds).	The throttle stick is not in the bottom (lowest) position.	Move the throttle stick to the bottom position.
After powering on, the motor does not work, a special tone "56712" is emitted after a 2-beep tone (beep–beep–).	The direction of the throttle channel is reversed, so the ESC has entered the program mode.	Set the direction of the throttle channel correctly.
The motor runs in the opposite direction.	The direction. The connection between ESC and the motor needs to be changed.	Swap any two wire connections between ESC and motor.