KAVAN V20 - Updating the firmware/en: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
| Line 5: | Line 5: | ||
==== You will need ==== | ==== You will need ==== | ||
* Computer | * Computer | ||
* ETHOS Suite software (Download: [https://ethos.frsky-rc.com ethos.frsky-rc.com], or for advanced users: [https://github.com/FrSkyRC/ETHOS-Feedback-Community/releases github.com/FrSkyRC] | * ETHOS Suite software (Download: [https://ethos.frsky-rc.com ethos.frsky-rc.com], or for advanced users: [https://github.com/FrSkyRC/ETHOS-Feedback-Community/releases github.com/FrSkyRC]) | ||
* USB-C cable | * USB-C cable | ||
Revision as of 09:44, 12 August 2024
Introduction
Keeping the firmware up to date is crucial to ensure the functions are working correctly.
You will need
- Computer
- ETHOS Suite software (Download: ethos.frsky-rc.com, or for advanced users: github.com/FrSkyRC)
- USB-C cable
Procedure
- Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
- Start the ETHOS Suite software.
- Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
- Open the Ethos menu in the left bar.
- Choose the preferred interface and audio languages you want to download.
- Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
- Wait for the update to finish.
- After the update finishes, press the "EJECT DRIVES" button.
- Disconnect the V20 from the computer and turn it off.
- Turn it on again and make sure everything works correctly.
Video tutorial
If you're not feeling confident enough after reading these steps, please follow our video tutorial.