Translations:KAVAN R6 - User manual/41/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
(Importing a new version from external source)
Line 3: Line 3:
# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver.
# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver.
# Select '''[ON]''' in the high-speed PWM setting
# Select '''[ON]''' in the high-speed PWM setting
  '''Notice:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.
  '''Caution:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.

Revision as of 13:48, 6 May 2024

Message definition (KAVAN R6 - User manual)
=== How to switch the high-speed PWM mode ===
# .In the factory settings, this function is disabled (OFF).
# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver.
# Select '''[ON]''' in the high-speed PWM setting.
{{Note|type=error|'''Caution:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.}}

How to switch the high-speed PWM mode

  1. .In the factory settings, this function is disabled (OFF).
  2. To open the receiver's setup menu, select [Setup] in the RF system menu for the receiver.
  3. Select [ON] in the high-speed PWM setting
Caution: The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_R6_-_User_manual/41/en&oldid=11140"