KAVAN V20 - Quickstart guide/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(založena nová stránka s textem „If you have any questions about the V20 transmitter and its operation, please contact the technical and service staff at KAVAN Europe s.r.o. by e-mail (info@kavanrc.com for general technical information, servis@kavanrc.com for service) or by phone (+420 466 260 133 for general technical information, +420 463 358 700 for service, during working hours 8 am–4 pm CET, Monday to Friday).“)
 
No edit summary
Line 4: Line 4:
If you have any questions about the V20 transmitter and its operation, please contact the technical and service staff at KAVAN Europe s.r.o. by e-mail (info@kavanrc.com for general technical information, servis@kavanrc.com for service) or by phone (+420 466 260 133 for general technical information, +420 463 358 700 for service, during working hours 8 am–4 pm CET, Monday to Friday).
If you have any questions about the V20 transmitter and its operation, please contact the technical and service staff at KAVAN Europe s.r.o. by e-mail (info@kavanrc.com for general technical information, servis@kavanrc.com for service) or by phone (+420 466 260 133 for general technical information, +420 463 358 700 for service, during working hours 8 am–4 pm CET, Monday to Friday).


<div lang="cs" dir="ltr" class="mw-content-ltr">
=== Technical specifications: ===
=== Technické specifikace: ===
{| class="wikitable"
{| class="wikitable"
|Přenosový systém
|RF system
|2,4 GHz simultánní na dvou frekvencích (Twin 2,4GHz)
|2.4GHz simultaneous on two frequencies (Twin 2.4GHz)
|-
|-
|Anténa
|Antenna
|dvě vestavěné 2,4GHz antény
|Two built-in 2.4GHz antennas
|-
|-
|Rozměry
|Dimensions
|221,5×214,5×94 mm (Š×V×H)
|221.5×214.5×94 mm (W×H×D)
|-
|-
|Hmotnost
|Weight
|1027 g (včetně akumulátoru)
|1027 g (including battery)
|-
|-
|Operační systém
|Operating system
|ETHOS™
|ETHOS™
|-
|-
|Vnitřní VF modul
|Internal RF module
|TW-ISRM
|TW-ISRM
|-
|-
|Počet kanálů
|Channels
|až 24
|Up to 24
|-
|-
|Rozsah provozního napětí
|Operating voltage
|6,5–8,4 V (2S LiPo akumulátor)
|6.5–8.4 V (2S LiPo battery)
|-
|-
|Provozní teplota
|Operating temperature
|(-10)–60 °C
|(-10)–60 °C
|-
|-
|Provozní proud
|Operating current
|240 mA při 7,4V
|240 mA při 7.4V
|-
|-
|Provozní frekvence
|Operating frequency
|2,400–2,4835 GHz
|2.400–2.4835 GHz
|-
|-
|Max. vyzářený výkon
|Max. radiated power
|100 mW EIRP
|100 mW EIRP
|-
|-
|Nabíjecí proud
|Charging current
|≤1 A ± 200 mA
|≤1 A ± 200 mA
|-
|-
|Napětí USB adaptéru
|USB adapter voltage
|5 V + 0,2 V
|5 V + 0.2 V
|-
|-
|Proud USB adaptéru
|USB adapter current
|>2,0 A
|>2.0 A
|-
|-
|Displej
|Display
|Podsvícený dotykový LCD s rozlišením 800×480 na 4,3“ úhlopříčky
|Backlit touch LCD with 800×480 resolution at 4.3" diagonal
|-
|-
|Kompatibilita
|Compatibility
|ACCST D16 / ACCESS
|ACCST D16 / ACCESS
|}
|}
</div>


<div lang="cs" dir="ltr" class="mw-content-ltr">
<span id="Funkce"></span>
=== Funkce ===
=== Features ===
</div>


<div lang="cs" dir="ltr" class="mw-content-ltr">
* Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution
* Barevná podsvícená dotyková LCD obrazovka s úhlopříčkou 4,3“ a rozlišením 800×480 px
* Up to 20 flight modes for perfect control of your model in all conditions
* Až 20 letových režimů pro perfektní ovládání vašeho modelu za všech podmínek
* Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
* Plná telemetrie s přenosem dat ze široké škály senzorů s možností zápisu na SD kartu
* Memory for 64 models expandable via SD card
* Paměť pro 64 modelů rozšiřitelná pomocí SD karty
* Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
* Hlasový výstup telemetrie z reproduktoru nebo pomocí kabelu s 3,5mm Jack konektorem
* Up to 2 external antennas can be connected
* Možnost připojení až 2 externích antén
* 6 three-position switches, 2 two-position (1 momentary) switches
* 6 třípolohových přepínačů, 2 dvoupolohové (1 momentový) přepínače
* 2 rotary side dials, 2 momentary buttons on the rear
* 2 postranní otočné ovladače, 2 momentová tlačítka vzadu
* 6 user-programmable buttons (front)
* 6 uživatelsky programovatelných tlačítek (vpředu)
* 2 programmable mixer rotary knobs
* 2 programovatelné otočné ovladače mixů
* 4 digital trims
* 4 digitální trimy
* Programmable slider (tension potentiometer)
* Programovatelný slider (tahový potenciometr)
* 6-axis gyro sensor
* 6osý gyroskopický senzor
* Precision cross-controllers housed in 10 ball bearings
* Precizní křížové ovladače uložené v 10 kuličkových ložiscích
* Trainer mode via cable or wirelessly via Bluetooth®
* Režim učitel žák pomocí kabelu nebo bezdrátově pomocí Bluetooth®
* F.BUS socket for programming servos Model names with 15 characters
* F.BUS zásuvka pro programování serv
* Subtrims
* Názvy modelů s 15 znaky
* Reversing the servo operation
* Subtrimy
* Setting end points and rate limiting
* Obracení smyslu výchylek serv
* Servo speed setting
* Nastavení koncových bodů a limitů výchylek
* Resetting data
* Nastavení rychlosti serv
* Fail-safe emergency rates
* Resetování dat
* Double deflections
* Nouzové výchylky Fail-safe
* Rate progression setting along 2 exponential curves or 21-point curves
* Dvojí výchylky
* Freely programmable mixes
* Nastavení průběhu výchylek po 2 exponenciálních křivkách nebo 21bodových křivkách.
* Motor shutdown
* Volně programovatelné mixy
* Safe idle
* Zhasínání motoru
* Logically linked switches
* Bezpečný volnoběh
* Intuitive user menu with customizable widgets
* Logicky vázané přepínače
* Servo monitor and servo tester
* Přehledné uživatelské menu s přizpůsobitelnými widgety
* Three timers (stopwatch or timer)
* Servo monitor a servo tester
* Model run time
* Tři časomíry (stopky nebo časovač)
* Transmitter run time
* Provozní doba modelu
* Indication of preset controller positions when the transmitter is started
* Provozní doba vysílače
* Adjustable display backlight intensity
* Signalizace předvolených poloh ovladačů při spuštění vysílače
* Calibration of gimbals
* Nastavitelná intenzita podsvícení displeje
* Sound and vibration warning
* Kalibrace křížových ovladačů
* Range check
* Výstražná signalizace zvuková a vibrační
* 3 receiver operation mode setting
* Kontrola dosahu
* Nastavení režimu činnosti se 3 přijímači
</div>

Revision as of 13:46, 8 March 2024

INTRODUCTION

The V20 is a 24-channel RC kit using a 2.4GHz simultaneous dual-frequency transmission system with full telemetry support (Twin 2.4GHz). It boasts a superior response time of up to 4ms and a range of up to tens of kilometres. You can also choose ACCST D16 or ACCESS transmission systems, also with telemetry. The V20 can therefore be paired with a wide range of KAVAN or FrSky receivers, telemetry or not, with classic PWM and S.BUS outputs. It is suitable for both advanced and sport pilots. Excellent for controlling various aircraft models or heli/multicopters. It can also be easily set up for ships or land models. To do this, use the wide range of functions and mixes available in the ETHOS™ operating system. You can conveniently adjust these to your own preferences on the large colour touchscreen.

If you have any questions about the V20 transmitter and its operation, please contact the technical and service staff at KAVAN Europe s.r.o. by e-mail (info@kavanrc.com for general technical information, servis@kavanrc.com for service) or by phone (+420 466 260 133 for general technical information, +420 463 358 700 for service, during working hours 8 am–4 pm CET, Monday to Friday).

Technical specifications:

RF system 2.4GHz simultaneous on two frequencies (Twin 2.4GHz)
Antenna Two built-in 2.4GHz antennas
Dimensions 221.5×214.5×94 mm (W×H×D)
Weight 1027 g (including battery)
Operating system ETHOS™
Internal RF module TW-ISRM
Channels Up to 24
Operating voltage 6.5–8.4 V (2S LiPo battery)
Operating temperature (-10)–60 °C
Operating current 240 mA při 7.4V
Operating frequency 2.400–2.4835 GHz
Max. radiated power 100 mW EIRP
Charging current ≤1 A ± 200 mA
USB adapter voltage 5 V + 0.2 V
USB adapter current >2.0 A
Display Backlit touch LCD with 800×480 resolution at 4.3" diagonal
Compatibility ACCST D16 / ACCESS

Features

  • Colour backlit LCD touchscreen at 4.3" diagonal with 800×480 px resolution
  • Up to 20 flight modes for perfect control of your model in all conditions
  • Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
  • Memory for 64 models expandable via SD card
  • Voice telemetry output from the speaker or via cable with a 3.5mm Jack connector
  • Up to 2 external antennas can be connected
  • 6 three-position switches, 2 two-position (1 momentary) switches
  • 2 rotary side dials, 2 momentary buttons on the rear
  • 6 user-programmable buttons (front)
  • 2 programmable mixer rotary knobs
  • 4 digital trims
  • Programmable slider (tension potentiometer)
  • 6-axis gyro sensor
  • Precision cross-controllers housed in 10 ball bearings
  • Trainer mode via cable or wirelessly via Bluetooth®
  • F.BUS socket for programming servos Model names with 15 characters
  • Subtrims
  • Reversing the servo operation
  • Setting end points and rate limiting
  • Servo speed setting
  • Resetting data
  • Fail-safe emergency rates
  • Double deflections
  • Rate progression setting along 2 exponential curves or 21-point curves
  • Freely programmable mixes
  • Motor shutdown
  • Safe idle
  • Logically linked switches
  • Intuitive user menu with customizable widgets
  • Servo monitor and servo tester
  • Three timers (stopwatch or timer)
  • Model run time
  • Transmitter run time
  • Indication of preset controller positions when the transmitter is started
  • Adjustable display backlight intensity
  • Calibration of gimbals
  • Sound and vibration warning
  • Range check
  • 3 receiver operation mode setting
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=KAVAN_V20_-_Quickstart_guide/en&oldid=55"