Translations:KAVAN V20 - Quickstart guide/25/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
Line 1: | Line 1: | ||
# Begin the registration process by selecting [Register]. | # Begin the registration process by selecting [Register]. | ||
# A window will appear with the message | # A window will appear with the message "Waiting...." with a repeating voice prompt "Register". Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up. | ||
# The RID and UID can be set at this stage: | # The RID and UID can be set at this stage: | ||
# Press the [Register] button to complete the setup. The | # Press the [Register] button to complete the setup. The "Registration OK" dialogue box will appear. Press the [OK] button to continue. | ||
# Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it. | # Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it. |
Latest revision as of 13:03, 15 May 2024
- Begin the registration process by selecting [Register].
- A window will appear with the message "Waiting...." with a repeating voice prompt "Register". Hold down the pairing button on the receiver and turn it on. Wait for the red and green LEDs to light up.
- The RID and UID can be set at this stage:
- Press the [Register] button to complete the setup. The "Registration OK" dialogue box will appear. Press the [OK] button to continue.
- Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.