Translations:KAVAN V20 - Quickstart guide/30/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
# Turn off the power to the receiver.
# Turn off the power to the receiver.
# RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a „Pairing“ voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message „ Waiting for receiver...“.
# RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a „Pairing“ voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message "Waiting for receiver...".
# Turn on the receiver without holding the F/S pairing button. A window will appear with the message „Device selection“ and the name of the receiver you just turned on.
# Turn on the receiver without holding the F/S pairing button. A window will appear with the message "Device selection" and the name of the receiver you just turned on.
# Scroll to the receiver name and select it. A message will appear indicating that the pairing was successful.
# Scroll to the receiver name and select it. A message will appear indicating that the pairing was successful.
# Switch off the transmitter and receiver.
# Switch off the transmitter and receiver.
# Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
# Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.

Latest revision as of 13:03, 15 May 2024

Message definition (KAVAN V20 - Quickstart guide)
# Turn off the power to the receiver.
# RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a „Pairing“ voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message "Waiting for receiver...".
# Turn on the receiver without holding the F/S pairing button. A window will appear with the message "Device selection" and the name of the receiver you just turned on.
# Scroll to the receiver name and select it. A message will appear indicating that the pairing was successful.
# Switch off the transmitter and receiver.
# Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
  1. Turn off the power to the receiver.
  2. RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a „Pairing“ voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message "Waiting for receiver...".
  3. Turn on the receiver without holding the F/S pairing button. A window will appear with the message "Device selection" and the name of the receiver you just turned on.
  4. Scroll to the receiver name and select it. A message will appear indicating that the pairing was successful.
  5. Switch off the transmitter and receiver.
  6. Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_V20_-_Quickstart_guide/30/en&oldid=13045"