KAVAN V20 - Updating the firmware: Difference between revisions
(Marked this version for translation) |
No edit summary |
||
| Line 20: | Line 20: | ||
# Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu. | # Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu. | ||
# Wait for the update to finish. | # Wait for the update to finish. | ||
# After the update finishes, press the "EJECT DRIVES" | # After the update finishes, press the "EJECT DRIVES" button. | ||
# Disconnect the V20 from the computer and turn it off. | # Disconnect the V20 from the computer and turn it off. | ||
# Turn it on again and make sure everything works correctly. | # Turn it on again and make sure everything works correctly. | ||
Revision as of 12:04, 5 August 2024
Introduction
Keeping the firmware up to date is crucial to ensure the functions are working correctly.
You will need
- Computer
- ETHOS Suite software (Download: ethos.frsky-rc.com, or for advanced users: github.com/FrSkyRC
- USB-C cable
Procedure
- Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
- Start the ETHOS Suite software.
- Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
- Open the Ethos menu in the left bar.
- Choose the preferred interface and audio languages you want to download.
- Pres the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
- Wait for the update to finish.
- After the update finishes, press the "EJECT DRIVES" button.
- Disconnect the V20 from the computer and turn it off.
- Turn it on again and make sure everything works correctly.
Video tutorial
If you're not feeling confident enough after reading these steps, please follow our video tutorial.