Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/156/en: Difference between revisions

Revision as of 11:12, 28 August 2024

Message definition (KAVAN Smart PRO SBEC ESCs - Instruction manual)

==== Futaba and Multiplex connection ====
Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:
{| class="wikitable" style="width: 100%; text-align: center;"
!
!'''Futaba S.Bus2 slot'''
!'''Note'''
!'''Slot Multiplex MSB'''
|-
|style="text-align: left;"| '''Speed'''
|2
|Select the RPM sensor on slot '''2'''.
|6
|-
|style="text-align: left;"| '''Current'''
|3
| rowspan="3" |Select the SBS01C current sensor on slot '''3'''.
|3
|-
|style="text-align: left;"| '''Voltage'''
|4
|2
|-
|style="text-align: left;"| '''Capacity'''
|5
|4
|-
|style="text-align: left;"| '''Temperature'''
|6
|Select the Temp125 sensor on slot '''6'''.
|5
|-
|style="text-align: left;"| '''PWM (0–100%)'''
|7
|Select the Temp125 sensor on slot '''7'''.
| -
|-
|style="text-align: left;"| '''Note'''
| colspan="2" |Manual detection in menu Linkage - Sensor.
|Automatically detected by the transmitter.
|}

Futaba and Multiplex connection

Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:

	Futaba S.Bus2 slot	Note	Slot Multiplex MSB
Speed	2	Select the RPM sensor on slot 2.	6
Current	3	Select the SBS01C current sensor on slot 3.	3
Voltage	4		2
Capacity	5		4
Temperature	6	Select the Temp125 sensor on slot 6.	5
PWM (0–100%)	7	Select the Temp125 sensor on slot 7.	-
Note	Manual detection in menu Linkage - Sensor.		Automatically detected by the transmitter.