Export translations

Settings

Group

Language

Format

Export for off-line translation

Export in native format

Export in CSV format

<languages/>
<div lang="en" dir="ltr" class="mw-content-ltr">
=== Introduction ===
Congratulations on purchasing the '''KAVAN Smart PRO Temp125C''', a tiny temperature sensor that supports multiple telemetry protocols. It can be used to measure the temperature of the electric motor, batteries and other elements of your model.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The T125C can communicate with the Smart PRO controllers as it offers direct temperature readings of the motor temperature to the controller. It also contains some memory space for predefined motor parameters. If you don’t want to play with the Smart PRO ESC settings, use the T125C sensor to store the motor parameters. As a result, the controller will read the motor settings and adjust its behaviour.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Features ===
* Small dimensions. The sensor is connected directly to the receiver telemetry port.
* Temperature min/max values are logged.
* Automatic telemetry detection: FPort, Duplex EX, Hott, MSB, S.Bus2, P²Bus.
* Configurable alarms on high temperatures.
* Configuration through the transmitter or MAV Manager PC software.
* Firmware updates.
* T125ID: Communication with the Smart PRO controllers.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Technical specifications ===
* Dimensions: 21,5×10×4 mm
* Weight: 1 g
* Temperature range: (-10)–125 °C
* Temperature resolution: 1 °C
* Operating current: 4 mA
* Supply Voltage: 3.5–12 V
* Telemetry: FPort, Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2, PowerBox P²Bus
* Status LED: No
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Installation ===
{| class="wikitable"
|+
|[[File:Smart PRO T125 - Installation.png|center|frameless|460x460px]]
|[[File:Smart PRO T125 - Jetibox connect.png|center|frameless|460x460px]]
|-
|'''Installation'''
Connect the T125C directly to the receiver telemetry port as shown in the picture.
|'''JETIBOX Connection'''
Plug the T125C into the sensor slot of the JETIBOX. Power it up with a battery (4.5–8.4 V). Now you can configure the sensor using the arrows on the JETIBOX.
|-
| colspan="2" |[[File:Smart PRO T125 - Smart PRO connect.png|frameless|460x460px|left]]
'''Smart PRO ESC connection'''
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Connect the T125C sensor to the controller using the supplied JR/Micro-JST cable adapter. Use the “IN A” port on the controller.
|}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Telemetry and settings ===
==== JETIBOX Menu Structure ====
[[File:Smart PRO T125 - Jetibox menu.png|right|frameless|560x600px]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:
* '''Actual values''' – displays the latest telemetry values (current, voltage, capacity, temperature) including minimums and maximums.
** '''Reset Min/Max''' - press left+right buttons together to reset all minimums and maximums.
* '''Settings''' – basic settings of the sensor
** '''Language''' – you can choose the language of the JETIBOX screen.
** '''Temperature Alarm''' – you can set a high-temperature alarm. *)
** '''Alarm Interval''' – sets the period between alarm announcements.
* '''Motor Info''' – settings related to motor identification (T125C only). If you enable this option, the configured motor parameters will be available to the Smart PRO controller.
** '''Acceleration''' – sets the fastest possible acceleration, still safe for the motor.
** '''Timing''' – either automatically detected by the ESC, or manual (0–30°).
** '''Startup''' Power – power used to start the motor spinning.
** '''Motor type''' – standard / high torque / high RPM.
* '''Service''' – In this menu, you can view the device version and reset it to the default factory configuration.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''*)''' The alarm setting is compatible with Duplex and Hott systems.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Graupner Hott Menu Structure ====
[[File:Smart PRO T125 - Graupner menu.png|right|frameless|360x360px]]
The T125 is recognized by default as a General Air Module. This can be changed to “EAM” or “Air-ESC” mode through the menu.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Futaba and Multiplex connection ====
Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots: Futaba S.Bus2 Multiplex MSB
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
{| class="wikitable" style="text-align: center;
!
! Futaba S.Bus2
! Multiplex MSB
|-
|style="text-align: left; |'''Temperature'''
|1
|5
|-
|style="text-align: left; |'''Note'''
|Manual detection in the menu Linkage – Sensor. Choose T125 on slot '''1'''.
|Automatically detected by the transmitter.
|}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Firmware update ===
Firmware updates for the temperature sensor are transferred from a PC via the USB interface.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The required programs and files are available at [https://www.mavsense.com/ www.mavsense.com].
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Install the MAV Manager software and the USB drivers on your computer. Check the system requirements.
# Disconnect all devices attached to the battery switch.
# Connect the USB interface to your PC, run MAV Manager and select the correct COM Port.
# Connect the temperature sensor according to the picture below.
# Apply external power to the battery switch via B1 or B2 battery inputs.
# Select the appropriate *.BIN file and press the Update button.
[[File:Smart PRO USB-C - Firmware update.png|center|frameless|960x960px]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== PC configuration ===
It is possible to use the MAV Manager software (1.7.0 and later) to conveniently configure all device settings, display real-time telemetry and make a backup copy of your settings. The configuration menu contains four buttons in the top toolbar:
* '''Refresh''' – forces the configuration to be reloaded from the device.
* '''Import''' – imports the settings from a file. If you have several devices and want all of them with identical settings, import the same settings to each device.
* '''Export''' – exports the settings from the device to a file. You can easily create a backup configuration stored on your PC. After creating a backup, you may easily experiment with the settings and later revert to the original configuration by pressing the “Import” button and choosing the original exported file.
* '''Reset default''' – resets the device to factory defaults and reloads all the settings.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:Smart PRO T125 - PC Config 1.png|frameless|460x460px|center]]
Connect the T125C to your PC using the USB interface. The MAV Manager will automatically detect the device. The device properties are available after pressing the “Configure” button.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:Smart PRO T125 - PC Config 2.png|frameless|460x460px|center]]
Real-time telemetry with min/max values. The MAV Manager is also able to create a log file from the real-time telemetry data, which can be viewed, analyzed, imported and exported.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:Smart PRO T125 - PC Config 3.png|frameless|460x460px|center]]
T125C settings. Every time you make any change in the configuration, the new value is immediately transferred to the device and saved to memory. There is no need for additional confirmation.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:Smart PRO T125 - PC Config 4.png|frameless|460x460px|center]]
Motor information screen. The settings configured in this menu will be read and used by the Smart PRO controllers.
[[File:Smart PRO T125 - PC Config 5.png|frameless|460x460px|center]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Safety information ===
* Operate the T125 always in a dry environment and within the device limits stated in this guide. Never expose the device to excessive heat or cold.
* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. It may result in damage to the product and denial of any warranty claims.
* Always check the polarity of the connection. Never inverse the polarity – It may result in damage to the product.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Manufacturer ====
KAVAN Smart PRO Temp125C Temperature sensor is made in Czechia by '''MAV Sense s.r.o.'''
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
E-mail: info@mavsense.com | Web: [https://www.mavsense.com/ www.mavsense.com]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Recycling and waste disposal note (European Union) ===
[[File:WEEE.svg|right|frameless|50x50px]]
Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== EU declaration of conformity (European Union) ===
[[File:CE.svg|right|frameless|50x50px]]
Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Smart PRO Temp125C Temperature sensor''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at [http://www.kavanrc.com/doc www.kavanrc.com/doc].
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Guarantee ===
The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
</div>