Translations:KAVAN Beta 1400 Kit - Instruction manual/37/en

KAVAN C2814–1400 brushless motor is to be secured to the supplied aluminium mount by two M3 setting screws. Check the correct alignment of the motor mount - the setting screws have to point straight to the access holes in the side of the fuselage. Glue the motor mount using thick cyano or MS polymer glue into the slot in the fuselage.
Please note the motor is offset up and right. This "up thrust" and "side thrust" is correct and purely intentional. It compensates for the effect of the propeller stream on the fuselage and tail. Check the correct alignment of both two fuselage halves before glueing the motor mount permanently into the right fuselage shell.
Motor direction of rotation check: Connect the motor cables to your ESC and secure the motor into the motor mount with two M2×6 mm setting screws. With your radio on, check the direction of rotation of your motor (see Fig. 3) as described in the chapter "RC SET INSTALLATION/7. Testing the power system" in this manual. Once set correctly, remove the motor from the motor mount.