Translations:KAVAN DARA A1 (F1H) 1200mm - Instruction manual/22/en

Insert the tail boom in the notch in the fuselage block 24. Trim the notch if necessary. Remove the tail boom, apply a generous coat of glue into the notch and insert the tail boom. Glue it on the building board in order to make the fuselage true and straight. Insert the two beech dowels 25 (ø4×32 mm) into the fuselage – no glue yet. The dowels will help with the correct alignment of the side covers. Apply glue to the left side of the fuselage block. Align and attach the side cover 26. You can lay the fuselage down onto your building board and weigh the cover down to cure. Insert and glue the main ballast 27 into the nose opening. Glue the other side cover 28 in place.