Translations:KAVAN DARA A1 (F1H) 1200mm - Instruction manual/38/en

From KAVAN RC Wiki
Revision as of 12:46, 21 May 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Final assembly, Centre of Gravity (CG)

Secure the side towhook 39 to the left side of the fuselage using two screws 38 – refer to the building plan. The towhook is adjustable. You can move it forward on a windy day or backward on a calm day in order to achieve nice and steady climbing during the hi-start. Use the tip of a pointy modeller's knife to cut slots for the brass tin rudder hinges 45 into the fin 29 and rudder 45. Cyano the hinges into the rudder and then into the fin leaving a slight gap between the fin and rudder. Tie the wing and horizontal tailplane to the dowels on the fuselage using several loops of the supplied rubber thread.