Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/116/en

From KAVAN RC Wiki
Revision as of 11:44, 16 July 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • Mechanical (default) - the switch connects the yellow (signal) and brown (ground) wires of the switch/button cable. Reverse switching logic is used so that the controller will remain on if the switch remains disconnected
  • Button/Hall - the first long press turns the controller on; the second long press turns it off. LED indicates on/off status. If a magnet (or button press) is detected, the LED will flash. The Hall sensor can be purchased as an accessory for KAVAN SMART PRO controllers.
  • Electronic - this option allows you to connect an external electronic switch (Touch Switch, RC Switch, etc.). In this case, the switching device is always powered and the logic level of the signal wire determines the on/off state of the controller.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Smart_PRO_SBEC_ESCs_-_Instruction_manual/116/en&oldid=15580"