Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/129/en

• Set the Acceleration Start to make the engine start as smoothly as possible. You can set this time up to 60s. Start-up Acceleration is used when the engine is revved up from zero speed or when the quick autorotation exit function is deactivated.
• Configure the autorotation save time and autorotation acceleration. The autorotation rescue function is used when you need to end autorotation quickly and prevent the model from crashing. In this case, move the throttle out of the idle position, "Autorotation Acceleration" is used to spin the engine until it reaches the desired speed. The "Autorotation Rescue" parameter determines the time after engine shutdown when the autorotation rescue function can be activated. When this time is exceeded, the standard start-up time is used.
• Advanced settings: governor gains - (P)roportional and (I)ntegral. You can adjust these gains to fine-tune the governor's response to rapid load changes during flight maneuvers. Please make the changes only in small increments and verify the resulting behavior in a short test flight.