Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/157/en

From KAVAN RC Wiki
Revision as of 11:44, 16 July 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PowerBox Telemetry

Since version 1.09, the KAVAN SMART PRO controller is able to recognize the PowerBox P 2Bus telemetry protocol. Connect the telemetry cable (red connector) to the P2Bus port on the receiver. The transmitter will locate the connected sensors as soon as the receiver is switched on. The controller telemetry should then be available within 2.5 seconds. You can now assign telemetry values to any widgets and alarms on the transmitter's desktop. The available telemetry is similar to the Duplex EX telemetry (see above). Configuring the controller via the PowerBox transmitter is not available at this time.

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Smart_PRO_SBEC_ESCs_-_Instruction_manual/157/en&oldid=15621"