Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/161/en

From KAVAN RC Wiki
Revision as of 11:44, 16 July 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • We assume that the gas and telemetry cables are correctly connected and the transmitter is switched on. Now set the remote control to the "Full throttle" position.
  • Switch on the controller either by connecting the drive kit or by switching on the external switch.
  • The engine will start, indicating the detection of a full throttle pulse. After 3 seconds, another beep will announce entry into the programming menu.
  • You can now fully withdraw the throttle. From the transmitter's main screen, scroll to the right and locate the TextGen menu. If the text menu is activated, the engine will never start to turn. To get the engine running normally again, you must exit the TextGen menu by selecting "Exit" on the main page.
  • The menu navigation is provided by the transmitter levers - the elevator lever moves the cursor up/down and the aileron lever changes the selected value.
  • Configuration changes are saved immediately after any value is modified.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Smart_PRO_SBEC_ESCs_-_Instruction_manual/161/en&oldid=15625"