Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/91/en
ESC-65 | ESC-85 | ESC-115 rev. 2024 | ESC-115 ACRO | ESC-145 | ESC-145 | ESC-155 rev. 2024 | |
---|---|---|---|---|---|---|---|
Dimensions [mm] | 75×29.5×10 | 75×29.5×12 | 80×30×13.5 | 88×32×14 | 88×32×20 | 74×53×31 | 88×32×14 |
Weight incl. cables | 63 g | 68 g | 81 g | 100 g | 125 g | 190 g | 100 g |
Continuous current | 50A* | 60A* | 80A* | 110A* | 110A* | 140A* | 150A* |
Peak current | 80A/2s* | 100A/2s* | 120A/2s* | 170A/2s* | 170A/2s* | 200A/2s | 200A/2s* |
Supply voltage | 6–51V | 6–51V | 6–51V | 6–51V | 6–51V | 10–51V | 6–27V |
LiPo articles | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 4–12 | 2–6 |
LiFe articles | 3–14 | 3–14 | 3–14 | 3–14 | 3–14 | 4–14 | 3–7 |
Cables
battery/motor |
2.5 mm²/
2.5 mm² |
2.5 mm²/
2.5 mm² |
4 mm²/
2.5 mm² |
4 mm²/
4 mm² |
4 mm²/
4 mm² |
6 mm²/
4 mm² |
6 mm²/
4 mm² |
Circuit antispark | No | ||||||
Recommended
connectors |
XT60 (60A) | XT60 (60A) | G4 (75A),
XT90 (90A) |
G5.5,
XT90 (90A) |
G5.5,
XT90 (90A) |
G5.5 (150A) | G5.5 (150A) |
Temperature range | -10÷110°C | ||||||
PWM frequency | 20kHz | ||||||
Operating current | 60mA | ||||||
Standby current | 4mA | ||||||
Propeller positioning | No | With additional Hall sensor | |||||
Telemetry | Duplex EX, Multiplex MSB, Futaba S.Bus2, Graupner Hott, PowerBox P2Bus, Spektrum SRXL2™ | ||||||
Status LED | Yes | ||||||
Active brake
(freewheeling) |
Yes | ||||||
Permanent output
BEC current |
12A* | 15A* | |||||
BEC peak current | 25A/2s* | 30A/2s* | |||||
Voltage setting
BEC |
5.5–8.4V (0.1V steps) | ||||||
Optical isolation | No | ||||||
Maximum speed | > 300 000 eRPM (two-pole motor) | ||||||
Ext. switch voltage | Approximately 10V | ||||||
Ext. switch current | Max. 30mA |
*) These values are valid if sufficient continuous air flow is ensured.