Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/157/en

From KAVAN RC Wiki
Revision as of 10:12, 28 August 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PowerBox Telemetry

From version 1.09, the KAVAN Smart PRO controller can recognise the PowerBox P²Bus telemetry protocol. Connect the Telemetry cable (red connector) to the P²Bus port of the receiver. The transmitter scans for attached sensors as soon as the receiver is powered up and the controller telemetry should be available within 2.5 seconds. After that, you are free to assign the telemetry to any desktop widgets and alarms. Available telemetry is similar to the Duplex EX telemetry (see above). The controller configuration through the PowerBox transmitter is not available at the moment.

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Smart_PRO_SBEC_ESCs_-_Instruction_manual/157/en&oldid=17539"