Translations:KAVAN DARA A1 (F1H) 1200mm - Instruction manual/31/en

Wing: Cut four pieces of the tissue 10 mm oversized all around the outline (do not forget the upper sheets have to be wider due to the airfoil camber). Again, start with the bottom side of one wing half. Apply the glue/ adhesive dope to the leading and trailing edges and all ribs, attach the tissue and smooth the edges with finger tips. Then proceed to the bottom of the other wing half. Cut the tissue all around the outline of the wing leaving it 4–5 mm over size. Bend and glue with thinned white glue or adhesive dope the overlapping tissue around edges of the entire wing.