Translations:KAVAN DARA A1 (F1H) 1200mm - Instruction manual/49/en
The kit contents
| Part | Building plan no. | Quantity |
|---|---|---|
| Fuselage block – 8 mm Ceiba Plywood | (24) | 1 |
| Side cover – 3 mm poplar Plywood | (26, 28) | 2 |
| Wing centre sheeting - balsa 1.5 mm – 100×40 mm | (4, 8, 9) | 6 |
| Stick set A | ||
| Fuselage stick - spruce 2×8×600 mm | (22, 23) | 2 |
| Wing leading edge - balsa 7×7×600 mm | (2) | 2 |
| Wing trailing edge - balsa 14×4.5×610 mm | (3) | 2 |
| Wing main spar - spruce 3×8×610 mm | (7) | 2 |
| Stick set B | ||
| Spruce stick 3×5×405 mm | (11) | 1 |
| Spruce stick 3×5×385 mm | (10) | 1 |
| Spruce stick 3×5×195 mm | (14) | 2 |
| Balsa fuselage block – thick | (20) | 1 |
| Balsa fuselage block – thin | (21) | 1 |
| Balsa stick 3×5×300 mm | (12) | 6 |
| Vlies tissue sheet | 3 | |
| Red tissue trim sheet | 1 | |
| Blue tissue trim sheet | 1 | |
| Sand paper fine & coarse | 1+1 | |
| Building plan | 1 | |
| Instruction manual | 1 | |
| Small parts bag A | ||
| Fin | (29) | 1 |
| Fin reinforcement plate | (30) | 1 |
| Rudder | (41) | 1 |
| Vertical tailplane seat - Plywood 1 mm - 25×15 mm | (31) | 1 |
| Spruce stick - 3×5×25 mm | (32) | 1 |
| Rear vertical tailplane seat – balsa 1.5 mm – 8×10 mm | (33) | 1 |
| Wing seat plate – Plywood 1.5 mm - 32×120 mm | (36) | 1 |
| Spruce stick - 3×5×120 mm | (37) | 2 |
| Gusset | (15, 42) | 10 |
| Balsa plate – balsa 3 mm 30×80 mm | (13) | 1 |
| Balsa plate – balsa 3 mm 30×30 mm | (16) | 1 |
| Balsa plate – balsa 3 mm 13.5×45 mm | (17) | 2 |
| Small parts bag B | ||
| Towhook | (39) | 1 |
| Nylon fabric | 1 | |
| Screw ø2×8 mm | (38, 40) | 4 |
| Rubber thread ø1×600 mm | 3 | |
| Bamboo dowel ø2.5×25 mm | (34, 35) | 2 |
| Bamboo dowel ø2.5×50 mm | (18) | 1 |
| Beech dowel ø4×32 mm | (25) | 2 |
| Ballast ø26×8 mm | (27) | 1 |
| Rudder hinge (brass tin) | (45) | 2 |
| Small parts bag C | ||
| Main wing rib | (1) | 28 |
| Wing root rib (bevelled) | (5) | 2 |
| Support rib | (6) | 2 |
| Wing tip | (41) | 2 |