Translations:KAVAN TARA A1 (F1H) - Instruction manual/10/en

• Lay the wing building plan on the building board and put a sheet of a thin clear plastic film to protect the building plan. If you have just a small building board, you can carefully cut the building plan into sections – wing section, horizontal tailplane section etc.
• Before you apply the glue, please, always double-check the correct size, shape and alignment of the particular part.
• Balsa and spruce sticks are intentionally supplied oversized in the kit. Pin the stick to the plan overlapping at both ends – you will cut/sand them to the correct length/shape once the assembly of the particular part has been finished.