Translations:KAVAN TARA A1 (F1H) - Instruction manual/22/en

From KAVAN RC Wiki
Revision as of 10:00, 11 September 2024 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/22/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/22/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Glue the spruce main spar 14 (3×5×395 mm) to the top of the horizontal tailplane framework. Fit and glue the front balsa upper plate 16 (3 mm – 30×30 mm) and two rear plates (3 mm – 13.5×45 mm) 17. Align the outer edges of the plates 17 to match the bottom plate 13 leaving about 2.5 mm slot between them to fit the bamboo dowel 18 later. Sand the gussets 15 to fit and glue them in place.

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_TARA_A1_(F1H)_-_Instruction_manual/22/en&oldid=18852"