Translations:KAVAN TARA A1 (F1H) - Instruction manual/23/en

From KAVAN RC Wiki
Revision as of 10:00, 11 September 2024 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/23/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/23/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Once the glue has cured thoroughly, remove the horizontal tailplane from the building plan. With a sanding block, shape the tips and centre plates as indicated on the plans (Det. A–A). Round the leading and trailing edges and the tips (Det. A–A). The horizontal tailplane has been finished for now. Once covered with the tissue, glue the bamboo dowel (Ø2.5×50 mm) 18 between the plates 17 extending behind the trailing edge by 15 mm.

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_TARA_A1_(F1H)_-_Instruction_manual/23/en&oldid=18855"