Translations:KAVAN Robin Glider Kit 495mm - Instruction manual/16/en

From KAVAN RC Wiki
Revision as of 13:15, 21 October 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Cover the upper side of the wing in the same manner. Start with the upper side of the wing centre section, and then the upper side of the wing outer panels. The tissue-covered wing should be given a coat of shrinking dope to protect the tissue from moisture. The shrinking dope must be diluted 50% with dope thinner - never use the “full strength” as it comes in the bottle. Apply two coats of the thinned shrinking dope. Once the tissue is nice and smooth without wrinkles (after 1–2 coats) you can apply the colour tissue trim – and continue applying the shrinking dope. Lightly sand all doped surfaces with fine sandpaper between each coat.