Translations:KAVAN Cumul 100 - Instruction manual/25/en

From KAVAN RC Wiki
Revision as of 11:30, 23 October 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • Trial fit the parts of the horizontal stabilizer, elevator, fin and rudder – no glue yet! Sand as necessary to obtain the perfect fit. Bevel the leading edge of the rudder and elevator to allow the control surface travel as indicated on the building plan.
  • Epoxy the T8 and T9 plywood inserts into the T10 stabilizer centre part. Glue together all the parts using medium cyano or white glue. (Fig. 1+2)
  • Put the tail feathers aside for now. They will be finished after covering, once the tailplane seat is installed to the tail boom.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Cumul_100_-_Instruction_manual/25/en&oldid=24310"