Translations:KAVAN Strike DLG 1498mm - Instruction manual/37/en

From KAVAN RC Wiki
Revision as of 13:28, 11 December 2024 by FuzzyBot (talk | contribs) (FuzzyBot moved page Translations:KAVAN Strike DLG - Instruction manual/37/en to Translations:KAVAN Strike DLG 1498mm - Instruction manual/37/en without leaving a redirect: Part of translatable page "KAVAN Strike DLG - Instruction manual")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Tools and Accessories

  • Very sharp modeller’s knife (e.g. KAV66.770 with No. 11 blades)
  • Scissors
  • Electric drill with drill bits
  • Wire cutter
  • Long nose pliers
  • Screwdrivers
  • Razor saw
  • Sandpaper No. 100–120, 180–220, 360–400
  • Needle files
  • Soldering iron and solder
  • Clothing pegs
  • Modeller’s pins
  • Epoxy mixing stick and vessel
  • Masking tape, clear sticky tape
  • Rubbing alcohol (for cleaning up excessive epoxy)
  • Paper tissue or soft cloth (for cleaning up excessive epoxy)
  • Straightedge with scale
  • Square edge
  • Thin clear plastic film (for protecting the building plan)
  • Permanent marker
  • Modeller’s sealing iron, heat gun (for covering)
  • Lightweight balsa filler
  • Hot melt glue gun & hot melt glue
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Strike_DLG_1498mm_-_Instruction_manual/37/en&oldid=28291"