Translations:KAVAN Mirai glider kit 1995mm - Instruction manual/26/en

Tack glue the pushrod tubes to the 1.5 mm balsa pushrod tube holder with three plywood formers supplied in the kit. Do not shorten the tubes yet – they will have to go all the way into the front part of the fuselage. (Fig. 37)
The elevator push rod tube goes all the way through the tail boom tube; carefully drill and cut the exit opening for the rudder push rod tube in the tail boom. (Fig. 38)
Insert the balsa holder with pushrod tubes into the tail boom; align with the front part of the fuselage. Once satisfied tack glue the holder to the tail boom tube.