Translations:KAVAN GO Servo USB programmer - Instruction manual/40/en

From KAVAN RC Wiki
Revision as of 07:02, 15 January 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Software installation

  1. Extract the downloaded .zip file, save it on your PC and run the .exe file.
  2. Plug the USB programmer into a free USB 2.0 port on your PC. The PC detects the device and the driver installation starts automatically. It might take some time depending on your system. The PC announces the installation progress; once finished, the restart of your PC might be required (the actual dialogue window depends on your system).
  3. Open the programmer software, “Adapter plug-in!” will appear in the information window. If not, you will have to remove the USB programmer and plug it again.
  4. Connect your GO-10xx series servo to the USB programmer; the software recognizes it automatically and will read the servo data and settings. “Servo plug-in!” will appear in the information window and the servo name, manufacture date and firmware version will appear in the Servo Information box. The green LED on the USB programmer flashes.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_GO_Servo_USB_programmer_-_Instruction_manual/40/en&oldid=30961"