Translations:KAVAN GO Servo USB programmer - Instruction manual/41/en

From KAVAN RC Wiki
Revision as of 07:02, 15 January 2025 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Wiring diagram

Note: If the servo is not detected, it might be connected to the USB programmer in the wrong way. Remove the servo and programmer and plug them again correctly (the signal wire – marked with a white stripe – has to be connected to the “S” pin of the servo programmer socket).
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_GO_Servo_USB_programmer_-_Instruction_manual/41/en&oldid=30962"