Translations:KAVAN V20 + ETHOS™ - User manual/544/en

From KAVAN RC Wiki
Revision as of 10:30, 19 March 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Connect the SBUS Out port of the redundant receiver to the SBUS IN port of the main receiver.
  2. Power up the receivers (the redundant receiver can be powered via the SBUS cable.
  3. Register the new receiver.
  4. Switch OFF the receivers.
  5. Tap 'Bind' on either the RX2 or RX3 line.
  6. Power up the receivers. Select the R9 redundant receiver. Tap on OK. Ensure that the Green LED on the redundant receiver is ON. The redundant receiver is now bound.
  7. The redundant receiver will now be listed.
Note: Although it is possible to bind both the main and redundant receivers to the same UID by powering them up individually, you will not have access to the Rx options while both are powered up.

Set - receiver options

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_V20_%2B_ETHOS™_-_User_manual/544/en&oldid=4354"