Translations:KAVAN Alpha 1500 V2 - Instruction manual/48/en

From KAVAN RC Wiki
Revision as of 11:13, 25 April 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Connect the power cable to the charger.
  2. Plug the power cable of the charger into the mains socket (230 V/50 Hz). All the LED glow green and flash red indicating the charger is ready to charge.
  3. Plug the balance connector of your flight battery (JST–XH) into the corresponding socket on the charger.
  4. The charger starts charging. LEDs will start to glow red. If 2S pack is connected, Cell 1 and Cell 2 LEDs will glow red. If the 3S pack is connected, Cell 1, Cell 2 and Cell 3 LEDs will glow red.
  5. Once a particular cell in the flight battery has been fully charged, the corresponding LED will glow green. 2S pack will be fully charged if Cell 1 and Cell2 LEDs glow green. 3S pack will be fully charged, if Cell 1, Cell 2 and Cell 3 LEDs glow green.
  6. Disconnect the flight battery from the charger. LEDs will glow green indicating the charger is ready to charge another pack. Unplug the charger from the mains socket if you are not charging another battery.
Caution: Charge the LiPo battery with the battery charger included in the RC Set or with a fully compatible charger that assures a safe charge to the LiPo pack. Always follow the safety precautions as laid down in the manufacturer’s manual. In the charging process, keep your charger and your battery in a cool and shady place, away from any possible source of fire. Do not cover the charger or the battery with clothes or similar. Ventilation is crucial for the necessary cooling of the devices.
Important: Never leave the battery charging unsupervised. If the battery becomes too hot or starts to “inflate”, disconnect it immediately from the charger.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Alpha_1500_V2_-_Instruction_manual/48/en&oldid=8639"