Translations:KAVAN Alpha 1500 V2 - Instruction manual/207/en

How to control your model?

In contrast to cars or boats, aircraft fly in three-dimensional space, which makes full control more complex. Turning the steering wheel left or right makes a boat or car turn left or right, applying more throttle the vehicle speeds up – and this is it. Moving the control sticks left or right has more effect than simply turning the model. The aileron and rudder control will be explained later.

Note: The control is fully proportional – the more you move the stick, the more movement of the control surface. The actual stick movement required is mostly quite small, and almost never from one end stop to the other!

Elevator controls the model in the vertical axis. Push up the elevator and your model’s nose will rise (and the model will climb if it has sufficient power). Pull down the elevator and your model will descend. Please note that your model can only climb if it has sufficient power applied. Your model will not necessarily climb simply because you have pushed up the elevator, and will normally need full power applied for a safe gentle climb. If the climb angle is too great, or the power applied is insufficient, your model will lose flying speed until the minimum (stall) speed. At the stalling speed (when the airflow starts to break away from the upper surface of the wing), your model will start to feel as though it is not responding as normal to control inputs, and then drop with little warning – apply down elevator to regain flying speed and full normal control.