Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/17/en

Once the glue has cured thoroughly, remove the horizontal tailplane from the building plan. Sand the leading and trailing edges flush with the end ribs. Glue the tailplane tips 15 in place. With a sanding block, shape the tips and the leading and trailing edges (Det. A–A). The horizontal tailplane has been finished for now. Once covered with the tissue, glue the bamboo dowel (ø2.5×40 mm) 16 onto the centre plate 12 extending behind the trailing edge by 15 mm.