Translations:KAVAN FS400AR - Instruction manual/35/en

From KAVAN RC Wiki

Resetting the Idle Mixture Control Screw

While carburettor adjustments are being made, it is possible that the Mixture Control Screw setting may be unintentionally changed. The pre-set setting can be found as following:

  • Carefully tighten the Mixture Control Screw until it is completely closed.

Then turn the Screw a full 2 revolutions back.

Note: If an onboard glow plug system is being used with the FS 400, it is proper to have the system operating while adjusting Mixture at idling speed.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_FS400AR_-_Instruction_manual/35/en&oldid=44694"