Translations:KAVAN FunStik 1280mm kit - Instruction manual/41/en

Fuselage

28. Prepare all the plywood/Lite Ply parts of the fuselage and the bottom balsa plate 53. Sand to fit if necessary. Check if the rudder and elevator servo tray parts 42 and 43 fit the servos you intend to use. Modify the servo trail parts as needed or make new ones from 3 mm Lite Ply tailored to your servos. If you have opted for a glow engine, make sure your intended fuel tank (wrapped in 3–5 mm foam rubber to reduce fuel foaming due to motor vibrations) fits the openings in formers 34, 35 and 38. Modify the formers as needed.