Translations:KAVAN GRE-24 - Instruction manual/11/en

From KAVAN RC Wiki

Transmitter and receiver binding

  1. Connect the receiver to the battery. Place the bind plug into the port labelled "BIND". Turn on the receiver switch. The LED will flash very shortly, go off and then blink again. Immediately before it goes on again, remove the binding plug. The LED will start blinking rapidly.
  2. Turn on the transmitter.
  3. The LED on the receiver should now turn on and remain solid, indicating that the binding process is complete.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_GRE-24_-_Instruction_manual/11/en&oldid=17998"