Translations:KAVAN GRE-24 - Instruction manual/6/en

From KAVAN RC Wiki

Lithium Polymer Battery Warning

  • Never charge a lithium polymer battery with a charger designed for NiCd, NIMH, or any other type of battery than LiPo. Use ONLY a charger designed for LiPo batteries.
  • Do not leave the LiPo battery unattended during charging.
  • Do not overcharge the battery.
  • Always charge LiPo batteries placed on non-flammable, heat-resistant surfaces.
  • Use of a LiPo-safe bag or container while charging is strongly recommended. Do not allow LiPo cells to overheat at any time. Cells which reach greater than 60 °C will usually become damaged and will catch fire.
  • Do not charge the LiPo pack while it is still in the model. Never charge or store battery packs in a vehicle.
  • Do not over-discharge LiPo; doing so will damage the battery.
  • Do not expose LiPo cells to water or moisture at any time.
  • Do not store battery near open flame or heater.
  • Do not assemble LiPo cells or pre-assembled packs together with other LiPo cells or packs.
  • Always store LiPo batteries in a secure location away from children.
  • Always remove the LiPo battery if the model is involved in any kind of crash.
  • Carefully inspect the battery and connectors for even the smallest damage.
  • Do not allow the electrolyte to get into the eyes or on the skin. Wash affected areas immediately if they come into contact with electrolytes. Do not alter or modify the connectors or wires of a LiPo battery pack.
  • Always inspect the condition of the battery before charging and operating.
  • Do not short-circuit the LiPo battery.
  • Avoid direct contact with a leaky/damaged battery.
  • Do not charge the battery out of the recommended temperature range (0–45 °C).
Caution: Cells may become hot after usage. Allow the pack to cool to room temperature before recharging.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_GRE-24_-_Instruction_manual/6/en&oldid=17993"