Translations:KAVAN GRT-10 Brushed - Instruction manual/16/en

Binding the transmitter and receiver

The transmitter and receiver have already been bound at the factory. However if the receiver needs to be replaced or additional receivers bound follow these steps:

1. Turn on the transmitter while holding the bind button to enter bind mode. Red G.LED will start flashing quickly. Once in bind mode release the bind button.
2. Turn on your receiver (turn on the ESC switch); the receiver will enter bind mode automatically when powered on.
3. Once binding is successful the receiver‘s LED will flash slowly
4. Turn off the receiver and then your transmitter.
5. Turn on your transmitter and then the receiver - and the receiver LED will glow red solid.

Note: If the receiver red LED blinks quickly, the binding has not been successful. Repeat the above described steps once more.